Fiber proof testers are designed to use a set load to a fusion-spliced optical Fiber in order to evaluate the strength of the spliced Fiber. Our Fiber proof testers are available in each linear and rotary designs, for evidence and stress screening. Fiber evidence testers are available for single setting, multimode, and polarization-sustaining materials. Pick from devoted, stand alone systems or SZ Stranding Line which can be also capable of stripping, cleaning, cleaving, splicing, or recoating.

Fiber Recoaters with Proof Testers offer simple, integrated solutions to recoat and test combination-spliced fibers. The Fiber recoating process restores the barrier coating to a stripped Fiber, offering much more flexibility compared to a heat-shrink safety sleeve, allowing so that it is dealt with and coiled without damaging the combination-spliced area. The incorporated linear or rotary proof tester enables users to instantly check a recoated Fiber with a pre-decided load and figure out the long-phrase longevity of the Fiber. Because of the ability to recover a fusion-spliced Fiber to near original condition, these systems are ideal for programs such as undersea optical Fiber wires, submarine communication cabling, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.

The procedure starts off with the combination-spliced portion of Fiber being positioned in the center of the mold set up (see image for the right). As soon as set in position, inserts in the Fiber obstructs secure the spliced Fiber set up. Recoat materials is motivated into the cavity and then Ultra violet-cured. The recoated Fiber can then be tested by pulling on it as much as a pre-determined weight.

Recoater and Mold Set up Choices – Recoaters are available with either an automatic or manual mold assembly. The automated mold set up functions pneumatic control of the mold plates and it is enhanced for high-volume Sheathing Line. Manual mold assemblies, on the other hand, use easy-to-open mold plates which provide more flexibility and are ideal for reduced-volume production or R&D programs. A computerized or handbook volumetric dispensing pump and injection method is used to inject the recoat materials to the mold cavity.

The PTR208 automatic recoater comes regular with a mold set up for Ø430 µm covered fibers; For our handbook recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes separately in order that customers can select the right mold coating diameter for his or her program. Custom mold covering dimensions can be purchased approximately Ø900 µm. Pre-installation of the mold assembly at the manufacturer is also readily available. Contact Tech Support for more information on custom molds or manufacturer assembly.

We provide you with each high-directory (Item # AB950200) and reduced-index (Product # PC373) recoat components to be used during these recoaters. Recoaters with handbook shot pumping systems (Product #s PTR206B and PTR307B) are suitable for each kinds of recoat material; other recoaters are suitable for the top-directory materials only. Our manual recoaters with an automatic shot system (Product #s PTR206 and PTR307) can be personalized to work with both the reduced- and-directory recoat material; make sure you contact Technology Support to learn more.

Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters come with an integrated linear evidence tester, that takes the Fiber up to and including predetermined weight (20 N) and then produces it. The linear proof tester uses exactly the same Fiber keeping obstructs because the recoater and so the Fiber will not must be relocated prior to testing. The PTR307 and PTR307B Fiber Recoaters come with an integrated rotary evidence tester, which can perform each evidence and tension assessments (?89 N). One set of proof check grips is provided; substitute proof test grips can be found below in packs of 10. Each testing procedure is completely programmable through the included handset or tablet controller, allowing the consumer to select parameters this kind of fdrofe the burden, the rate at which the load is applied, as well as the hold time.

Inserts for Fiber Keeping Obstructs – In addition to the above, we offer a number of Tape Former to be used in the Fiber keeping obstructs from the recoaters in order to support a large range of Fiber coating diameters. For recoaters using a rotary proof tester, the inserts are appropriate for Fiber covering diameters in a range from 125 µm to 900 µm. For recoaters using a linear proof tester, the inserts include a range for Fiber films from Ø250 µm to Ø900 µm.

Optical Fiber Ribbon Machine..